What a 800 kVA generator can provide
A 800 kVA diesel generator is commonly considered for data centres, hospitals, factories, distribution hubs, utilities and major commercial estates. At the widely used 0.8 power factor, 800 kVA converts to approximately 640 kW. That conversion is a useful starting point, not a final generator selection: the connected load, starting demand, operating duty, environment and required resilience all influence the set that should be specified.
Typical connected equipment may include large motor groups, chillers, UPS-backed IT loads, production lines, pumps and high-capacity building services. FW Power can help compare new and used generators, confirm the rating basis and bring together controls, fuel, acoustic, delivery, installation and long-term service requirements.
How to size the generator correctly
Start with an equipment schedule rather than a single maximum-demand figure. Record voltage, phase, running kW or amps, power factor and the way each load starts. Identify the largest motor, lift, compressor, pump, transformer or UPS input and decide which loads can operate together. Allow for foreseeable growth, but avoid excessive oversizing: a diesel engine that spends long periods at very light load may not reach its preferred operating conditions.
For this rating, alternator response, UPS compatibility, harmonic content, step-load performance and fault-level coordination require project-specific engineering. The final assessment should also distinguish essential loads from non-essential loads, the acceptable interruption time and whether staged reconnection can reduce the required generator size.
Prime, standby and installation choices
Prime and standby kVA figures are not interchangeable. A standby set supports emergency operation during a normal mains failure, subject to the engine manufacturer’s rating definition. Prime-rated equipment is selected for longer variable-load operation. Confirm the required duty before comparing quotations or used machines.
At 800 kVA, containerised or purpose-built acoustic systems may be appropriate, with engineered ventilation, bulk fuel, switchgear, protection and remote monitoring. The installation must provide combustion and cooling airflow, safe exhaust discharge, suitable foundations, fuel containment, cable access, earthing, protection and space for service work. Noise targets and planning constraints should be considered before the enclosure or plant-room layout is fixed.
New or used 800 kVA generators
A new generator offers a configuration selected around the project, including engine and alternator choice, control panel, enclosure, fuel tank and accessories. A used generator can provide strong value and shorter lead times when its rating, condition and service history suit the duty. FW Power prepares used generators through inspection and testing appropriate to the machine and proposed application; availability is always confirmed at the time of enquiry.
Compare the complete package, not only the nameplate kVA. Controller functions, breaker rating, socket or cable termination, fuel autonomy, dimensions, lifting arrangements, emissions requirements and the support available after installation can materially affect suitability and project cost.
Frequently asked questions
How many kW is a 800 kVA generator?
At a power factor of 0.8, 800 kVA is approximately 640 kW. The usable output must still be checked against the manufacturer’s prime or standby rating and the site load profile.
How many amps can a 800 kVA three-phase generator supply?
At 400 V three phase, the calculated line current is approximately 1,155 A. Current changes with voltage and connection, so protective devices and cables must be selected from the final generator data and installation design.
Is a 800 kVA generator suitable for motor loads?
Potentially, but the motor starting method, starting current, allowable voltage dip and sequence of operation must be checked. A 800 kVA running-load total alone is not enough to confirm suitability.
Should I select prime or standby power at 800 kVA?
Use the rating that matches the operating duty. Standby power covers limited-duration emergency use when mains fails; prime power is intended for variable-load operation over longer running periods. Always compare like-for-like manufacturer ratings.
